Haas UMC-750
The Haas UMC-750 Universal Machining Centre allows 3+2 and simultaneous 5-axis machining. Flexible, 5-axis machining offers reduced set-up times and increased accuracy for multi-sided and complex parts.
The Haas UMC-750 offers travels of 762mm x 508mm x 508mm and an integrated dual-axis trunnion table. The machine is equipped with an inline direct-drive, low-heat 40-taper spindle (8100 standard, or optional 12,000 rpm), and comes standard with a 40+1 tool side-mount tool changer. The trunnion can position parts to nearly any angle for 5-sided (3+2) machining, or provide simultaneous 5-axis motion for contouring and complex machining. The machine provides +35 and -110 degrees of tilt and 360 degrees of rotation for excellent tool clearance and large part capacity.
Specifications
Item #: |
UMC-750 |
Item Name: |
UMC-750 Universal Machining Center |
Travels
X Axis Travel Length: |
762 mm |
Y Axis Travel Length: |
508 mm |
Z Axis Travel Length: |
508 mm |
B Axis Tilt Angle: |
-35 º |
C Axis Rotation Angle: |
360 º |
Trunnion
Trunnion - Capacity: |
300 kg |
Trunnion - Number of T Slots: |
7 |
Trunnion - T-Slot Width: |
16 mm |
Trunnion Table Length: |
630 mm |
Trunnion Table Width: |
500 mm |
Operating Dimensions
Maximum Operating Height A: |
3048 mm |
Maximum Operating Width B: |
4115 mm |
Maximum Operating Depth C: |
2870 mm |